Modem
| Ideal CallClerk
Settings | Tested
with Windows Versions | Additional
Comments |
AOpen
FM56-PX
| TAPI
| Worked with 2000 and XP;
did not work with Vista 64 bit | Works great
in the US and Canada (includes speakerphone)
|
| AOpen
FM56-PV | TAPI
| Worked with 2000 and XP;
did not work with CallClerk in Vista 64 bit | Works great
in the US and Canada (includes speakerphone) |
| MT5634ZPX-PCI-U (note:
the "U" is important). | TAPI | Worked with Vista (64
bit tested) | FFirst modem that was
found to play and record wav files (as required to support answering machine
functions) under Vista.
Required a beta driver and special install instructions from vendor.
In addition updates were required for Caller ID; these have been shared
with the Multitech but if you need them please just e-mail
info@callclerk.com.
NOTE: Recently 2 clients have reported that they could not get
caller id working on this modem, am working with Multitech on this
issue now.
|
| ZOOM 56K
V.92 PCI Fax modem (model 3025 C) | TAPI | Tested with 2000 and XP | Works well
in the US and Canada but no speakerphone; works in the UK but ONLY in
direct access mode.
Note: the model number including the "C" is important
Note: this is the ONLY modem found to date that works in the UK (and
again, only in direct access mode)
|
| Modem
Blaster by Creative V.92 DE5671-1 | TAPI | Tested with XP and Vista | Reported Caller ID, dial
out worked,
but voice functions (such as play a answering machine message did not
work). This is a relatively small USB Modem, good for laptop
users.
Vista 32 and 64 bit drivers are available at Creative's web site. |
| HIRO 50113 | XP: TAPI
VISTA:
COM
Port
+VCID=1 | Tested on XP: Caller ID,
Answering Machine, record voice all worked - does not support
speaker phone.
Tested with Windows Vista 64 bit: worked in direct access
mode with CallClerk. | This is a
very small USB modem - good for use with laptops and desktops both.
On Vista:Required a
'Windows Update'
for
the driver before the modem would work in tapi modem; did not
report caller id in tapi mode in Canada (but did report caller id in
direct access mode). |
| PCTEL
HSP56 MicroModem Data/Fax | COM
PORT
#CID=2 | Only tested with 2000
and XP | Did
not work in TAPI mode
|
TRENDNet
TFM-PCV92I
| COM
Port
+VCID=2 | Only tested with 2000
and XP | When
tested Caller ID did not work properly for a Canadian call using TAPI
or +VCID=1; but did work ok for +VCID=2
You should be able to find this modem for under $15 (before shipping
and tax).
|
| US
Robotics 56K Voice INT | COM
Port
either
+VCID=1
or
+VCID=2 | Only tested with 2000
and XP | Worked in direct access
mode; did
not work in TAPI mode
|
| U.S.
Robotics 56K FAX EXT | COM Port
+VCID=1 | Only tested with 2000
and XP | Worked in
the UK in COM Mode only, TAPI mode did not work. |
HDAUDIO SoftV92 Data Fax
Modem with SmartCP
| N/A | Only tested with 2000
and XP | Did
not work in TAPI mode; COM Mode compatibility unknown |
